3 Series

Vertical multi-stage stainless steel pumps

EVM

- End Suction Pumps feature a unique one piece volute casing

- Pump body. Impeller, casing cover and shaft in AISI 304

- Mechanical seal in carbon/ceramic/NBR for standard version

- Mechanical seal in carbon/ceramic/FPM for H version

- Mechanical seal on SiC/SiC/FPM for HS version

- 2 and 4 pole motor

- Insulation: Class F

- Protection degree: IP55

- 3~230/400V +/- 10% 50Hz up to 4kW includes, 400/690V +/- 10% above

- Thermal protection to be provided by the user

The pumps are suitable for liquid transfer in

- Washing systems

- Heating systems

- Cooling and air-conditioning systems

- Maximum working pressure      10 bar

- Vertical multistage pumps with stainless steel components

- Impeller, diffusers, casing cover, outer casing, shaft sleeve, coupling covers, fixing in contact with liquid: AISI 304 stainless steel

- Bottom casing: AISI 304 stainless steel (EVM) - cast iron (EVMG), AISI 316L (EVML)

- Motor bracket and base: cast iron (not in contact with the pumped liquid)

- Bearings (in contact with liquid): tungsten carbide

The pumps are suitable for liquid transfer in

- Civil, Industrial, farming, fire-fighting, boosting systems

- Water treatment plants (reverse osmosis, filtrations)

- Irrigation system

- Washing system

- Movement of hot and cold water for heating, cooling and air-conditioning system.

- Boiler feeding

- Flow, Q:                         Max. 80 m3/h

- Head, H:                         Max. 300 m

- Liquid temp.:                  - 15°C to +120°C

- End suction mono-bloc centrifugal pump with 2 poles motor

- Insulation class F

- Protection degree IP55

- Single phrase 230V ± 10% 50Hz,

- Three phrase 230/400V ± 10% 50Hz

- Permanent split capacitor and automatic thermal overload protection for single-phase version

- Thermal protection to be provided by the user for three-phase version

- Pump body, bracket and impeller in cast iron

- Shaft in AISI 304

The pumps are suitable for liquid transfer in

- Water boosting systems

- Heating systems

- Cooling and air-conditioning systems

- Washing systems

- Maximum working pressure: 10 bar

- CMR series is fitted with an open impeller for suspended solids handling.

- Pump body in cast iron

- Mechanical seal in carbon/ceramic/NBR

- T.E.F.C. 2 poles motor

- Insulation class F

- Protection degree IP44

- 1~230V ± 10% 50Hz, 3~230/400V ± 10% 50Hz

- Permanent split capacitor and automatic thermal overload protection for single-phase version

The pumps are suitable for liquid transfer in

- Water boosting systems

- Irrigation

• - Maximum working pressure: 6 bar,

                8 bar for CMA 1.50-2.00-3.00 – CMB 4.40-5.50

• - Maximum liquid temperature:

                35°C according EN 60335-2-41 for domestic uses

                40°C for CMA 0.50-0.75-0.80-1.00

- Easy maintenance BPO (Back pull out) feature allow all rotating element to be removed without disconnecting the suction and discharge pipework.

- Higher operating efficiency over a wider range of capacities, lowers operation cost.

- Non-overload design to ensure stable performance for all applications.

The pumps are suitable for liquid transfer in

- Water supply

- Heating systems

- Cooling and air-conditioning systems

- Fire-fighting application

- Irrigation

- Industrial plants.

• - Maximum working pressure: 10 bar, 16 bar

  - Maximum liquid temperature: 100°C

- A robust cast iron pump, with solids handling semi-vortex impeller

- 2 poles motor

- Single phrase 0.25 to 0.75 kW

- Three phrase 0.25 to 3.7 kW

- Built in thermal protector

- Liquid handled: River water, sewage

- Pump body, bracket and impeller in cast iron

The pumps are suitable for liquid transfer in

- Ideal for waste water application containing soft or fibrous solids

- Industrial waste water drainage

- Septic effluent

• - Max. submergence 0.25 to 1.5 kW (4m)

  - Min. submergence 2.2 to 3.7 kW (8m)

  - Synchronous speed 3000 min-1/ 50Hz

- Pumps casing: Cast Iron

- Impeller: Cast Iron

- Suction cover: Cast Iron

- Air filled, dry submersible, 4 pole motor

- Insulation class F

- IP58 protection

- 3 phase

- In built overload protection

The pumps are suitable for liquid transfer in

• - Waste water
• - Treated water
• - Effluent
• - Storm water
• - Municipal or industrial drainage
• - Fountains and water displays

• - Motor Output: 1.5 to 3.7 kW (3ph)

  - Manual only Outlet Size: 65 to 80 mm

  - Flow Rates: 100 to 1200 lpm

  - Head: 3 to 18 m

  - Max Liquid temp: 40°C

  - Max. immersion: 8m

  - Max. solids: 40 or 46 mm (depending on model)

- 2 poles motor

- Insulation: Class F

- Permanent split capacitor and automatic thermal overload protection to be provided by user for three-phase version

- Flange: PN10

Inline centrifugal pumps made of stainless AISI 304. Applications include chilled water, air conditioning systems and heating systems for secondary hot water and general low-pressure applications in industry. It is light construction means installation can be achieved with 1 person where conventionally heavy cast iron & bronze pumps require additional personnel and lifting equipment.

• - Maximum positive suction pressure:

  2 bar for all single-phase for LPS 25 three-phase,

  4 bar for LPS 32-40-50 three-phase,

  - Maximum liquid temperature: 100°C